JVC SmartLVDS IP Core is aiming to apply to the signal transmission path between the SoC and LCD panel module of LCD TVs. But generally this transmission path will be to use a LVDS, has increased the amount of mosquito transmission speed and higher resolution images, such as by over a three-dimensional display. The more the amount of transmission, but are not forced to increase the number of channels, the cost to get intimidated. The cost of the cable connectors and a large number of terminal pay anywhere in particular.
- SmartLVDS is effective for middle to low-end LCD TV in particular. Although the transmission method using LVDS, which can be compressed to 1/2 the signal transmission can double the amount if they have the same transmission speed transmission. If they have the same amount or transmission, can be reduced to 1/2 the number of signal channels. SmartLVDS IP core circuit is a circuit twice the compression and decompression compression ratio. Each IP is integrated into a chip of Timing controller (T-CON) of SoC and LCD panel module for TV. Since this IP core low compression ratio, (area = chip) is small circuit scale, the cost of the T-CON and SoC does not have little effect. In addition, for compression rate is low, almost no degradation of image quality pot. On the other hand, because you can greatly reduce the cost of the cable connectors and will impact the cost down significantly.
Block Diagram of the JVC SmartLVDS IP reduce cost dramatically for middle to low-end LCD TV.