You are here:
Low Drop 50mA Regulator on TSMC 12nm FFC
The S3REG5012T12FFC is a regulator circuit which has been designed to provide 0.8V with a load current of up to 50mA. The output voltage is programmable.
The S3REG5012T12FFC is a regulator circuit that features an automatic feedback sensing option to maintain a constant regulated output voltage level. It has been designed to provide a stable output in both low-drop and high-drop operation, while maintaining minimum ripple on supply lines in the presence of large load current spikes inherent with switching loads, e.g. high-speed ADCs.
The S3REG5012T12FFC has been designed to allow low-drop operation (the PMOS pass device has been scaled for a voltage drop of 200mV). To achieve these goals, the S3REG5012T12FFC requires a 1μF external ceramic capacitor. The S3REG5012T12FFC also includes low power mode option to reduce quiescent current for low loads.
Also include in a current limiter to reduce inrush current.
The S3REG5012T12FFC uses 1.8V thick oxide devices from a standard 12nm logic process. The circuit can be scaled for a range of load currents and the output voltage level is programmable.
For maximum flexibility, the user can adjust the regulated output voltage if the S3REG5012T12FFC is placed on a different chip.
The S3REG5012T12FFC is readily portable to other manufacturing processes or can be customised for specific customer requirements and it’s designed with the Deep-Nwell process option.
The S3REG5012T12FFC is a regulator circuit that features an automatic feedback sensing option to maintain a constant regulated output voltage level. It has been designed to provide a stable output in both low-drop and high-drop operation, while maintaining minimum ripple on supply lines in the presence of large load current spikes inherent with switching loads, e.g. high-speed ADCs.
The S3REG5012T12FFC has been designed to allow low-drop operation (the PMOS pass device has been scaled for a voltage drop of 200mV). To achieve these goals, the S3REG5012T12FFC requires a 1μF external ceramic capacitor. The S3REG5012T12FFC also includes low power mode option to reduce quiescent current for low loads.
Also include in a current limiter to reduce inrush current.
The S3REG5012T12FFC uses 1.8V thick oxide devices from a standard 12nm logic process. The circuit can be scaled for a range of load currents and the output voltage level is programmable.
For maximum flexibility, the user can adjust the regulated output voltage if the S3REG5012T12FFC is placed on a different chip.
The S3REG5012T12FFC is readily portable to other manufacturing processes or can be customised for specific customer requirements and it’s designed with the Deep-Nwell process option.
查看 Low Drop 50mA Regulator on TSMC 12nm FFC 详细介绍:
- 查看 Low Drop 50mA Regulator on TSMC 12nm FFC 完整数据手册
- 联系 Low Drop 50mA Regulator on TSMC 12nm FFC 供应商
Block Diagram of the Low Drop 50mA Regulator on TSMC 12nm FFC

LDO IP
- Low-leakage LDO in TSMC 22ULL to supply logic and analog domains (up to 5.5V input supply)
- Ultra-low quiescent LDO voltage regulator in TSMC 22ULL
- Low Drop-Out Regulator (LDO) in GLOBALFOUNDRIES 22FDX
- Low-leakage LDO in TSMC 22ULL to supply logic and analog domains (up to 3.63V input supply)
- Power Quencher® Capless LDO for SoC Integration and Hardware Security (22 nm, 500 mA, excellent quiescent current for IoT)
- Power Quencher® Capless LDO for SoC Integration and Hardware Security (22 nm, 0.1 mA, excellent quiescent current for IoT)