MIPI C-PHY v1.2 D-PHY v2.1 TX 3 trios/4 Lanes in TSMC (16nm, N7, N5A)
You are here:
- Silicon IP Catalog >
- Processor Solutions >
- Microcontroller >
- 8-Bit Microcontroller >
- PIC16 Microcontroller
x2 - 8-bit RISC Microcontroller
The DFPIC166X is a low-cost, high performance, 8-bit, fully static soft IP Core. The core has been designed with a special concern about low power consumption, assuring the best power use, price and performance combination available on the IP cores market.
The DFPIC166X soft core software, is compatible with the industry standard PIC 16XXX Microcontrollers. It implements an enhanced Harvard architecture (separate instruction and data memories), with independent address and data buses. The 14 bit program memory and 8-bit dual port data memory allow instruction fetch and data operations, to occur simultaneously. The advantage of this architecture, is that the instruction fetch and memory transfers can be overlapped, by multi stage pipeline, so that the next instruction can be fetched from program memory, while the current instruction is executed with data, from the data memory. The DFPIC166X architecture is 2 times faster, compared to standard architecture.
The DFPIC166X Microcontroller fits perfectly in applications ranging from high-speed automotive and appliance motor control, to low-power, remote transmitters/receivers, pointing devices and telecom processors. Built-in power save mode, makes this IP core perfect for applications, where the power consumption aspect is critical.
The DFPIC166X is delivered with fully automated testbench, complete set of tests and DoCD hardware on-chip debugger, allowing easy package validation, at each stage of SoC design flow.
Each of the DCD's PIC Core, has built-in support for the DCD Hardware Debug System, called DoCD . It is a real-time hardware debugger, which provides debugging capability of a whole System on Chip (SoC).
Unlike other on-chip debuggers, the DoCD provides a non-intrusive debugging of running application. It can halt, run, step into or skip an instruction, read/write any contents of microcontroller, including all registers, SFRs, including user's defined peripherals, data and program memories.
The DFPIC166X soft core software, is compatible with the industry standard PIC 16XXX Microcontrollers. It implements an enhanced Harvard architecture (separate instruction and data memories), with independent address and data buses. The 14 bit program memory and 8-bit dual port data memory allow instruction fetch and data operations, to occur simultaneously. The advantage of this architecture, is that the instruction fetch and memory transfers can be overlapped, by multi stage pipeline, so that the next instruction can be fetched from program memory, while the current instruction is executed with data, from the data memory. The DFPIC166X architecture is 2 times faster, compared to standard architecture.
The DFPIC166X Microcontroller fits perfectly in applications ranging from high-speed automotive and appliance motor control, to low-power, remote transmitters/receivers, pointing devices and telecom processors. Built-in power save mode, makes this IP core perfect for applications, where the power consumption aspect is critical.
The DFPIC166X is delivered with fully automated testbench, complete set of tests and DoCD hardware on-chip debugger, allowing easy package validation, at each stage of SoC design flow.
Each of the DCD's PIC Core, has built-in support for the DCD Hardware Debug System, called DoCD . It is a real-time hardware debugger, which provides debugging capability of a whole System on Chip (SoC).
Unlike other on-chip debuggers, the DoCD provides a non-intrusive debugging of running application. It can halt, run, step into or skip an instruction, read/write any contents of microcontroller, including all registers, SFRs, including user's defined peripherals, data and program memories.
查看 x2 - 8-bit RISC Microcontroller 详细介绍：
- 查看 x2 - 8-bit RISC Microcontroller 完整数据手册
- 联系 x2 - 8-bit RISC Microcontroller 供应商