The MXL-DPHY-CSI2-RX+ is a high-frequency low-power, low-cost, source-synchronous, Physical Layer supporting the MIPI Alliance Specification for D-PHY v2.1, which is backward compatible with MIPI Specification for D-PHY v1.1.
The IP is configured as a MIPI Slave optimized for CSI-2 (Camera Serial Interface) applications.The High-Speed signals have a low voltage swing, while Low-Power signals have large swing. High-Speed functions are used for High-Speed data traffic while low power functions are mostly used for control.
- Consists of 1 Clock lane and 4 Data lanes.
- Supports MIPI Alliance Specification for D-PHY Version 2.1
- Supports both high speed and low-power modes.
- 80 Mbps to 1.5 Gbps data rate in high speed mode.
- 10 Mbps data rate in low-power mode.
- Low power dissipation.
- Loopback testing and ATB support.
- Resistance termination calibrator.
- Comprehensive embedded DFT features for allowing cost-effective high-volume manufacturing tests
- Supports full-speed loopback testability with minimal area overhead for high-volume manufacturing tests
- Embedded PLL with compact footprint used for generating high-speed clock during test modes and eliminate the need for an external PLL.
- One transmitter is used to test multiple receivers to minimize area overhead
- Two different loopback modes allow isolation of faults and defects
- Analog test bus (ATB) for sensing internal analog voltages and currents
- GDSII, LEF and LVS Netlist
- Integration Guideline
- Physical Verification Report
- Timing Model and Behavioral Model
- One year support
- Consumer Electronics
Block Diagram of the MIPI® CSI-2 Slave D-PHY