The ISO 7816-3 Analog Front End (AFE) is a mixed-signal IP including five fully integrated I/O pads intended for both interface device (reader) and Integrated Circuit Card (ICC).
特色
- five fully-integrated I/O pads: CLK, RST, I/O, VCC and GND
- fully compliant with the ISO/IEC 7816-3 standard (class A, B and C)
- proven track record through mass production in 130 nm CMOS process
- square pad with 80 µm x 80 µm opening
- operating junction temperature range: -40°C to 125°C
- CLK digital input pad: up to 50 MHz; internal pull-up; input noise rejection through optional filter and Schmitt trigger; standby mode; embedded level-shifters; power-up protection; silicon area smaller than 0.016 mm² in a 130 nm process
- RST digital input pad: internal pull-up; input noise rejection through Schmitt trigger buffer; standby mode; embedded level-shifters; power-up protection; silicon area smaller than 0.016 mm² in a 130 nm process
- I/O bidirectional digital pad: three output modes with optional slew-rate; internal pull-up; Schmitt triggers; standby mode; embedded level-shifters; power-up protection; independent control of Rx and Tx paths; silicon area smaller than 0.024 mm² in a 130 nm process
- VCC power supply pad: silicon area smaller than 0.010 mm² in a 130 nm process
- GND power supply pad: silicon area smaller than 0.010 mm² in a 130 nm process
- ESD protection (4 KV HBM) and digital controller available separately
优势
- ISO 7816-3 compliant
- Fully integrated
- Silicon proven
- Class A, B & C
- Internal pull-up
可交付内容
- GDSII stream and layer map file
- Library Exchange Format (LEF) file
- Circuit Description Language (CDL) netlist
- Liberty Timing File (.lib)
- VHDL behavioral model
- design specification