You are here:
High-Performance and Low-Power Bandgap
The BGR IP is low power first order bandgap reference with worst case PSRR of 52dB at 2MHz. The maximum power consumption is 22µA and it produces a reference voltage of 550mV with worst case temperature variation of 20ppm/°C for a wide temperature range of -40°C to 125°C.
The BGR IP operates with 1.4-1.8V AVDD supply and takes in a Reference/PTAT (proportional to absolute temperature) current to bias the internal amplifier.
The current consumption of the module can be reduced to as low as 15µA by adjusting the “Test Mode” bits.
The noise in the generated 550mV reference voltage is less than 400nV at 10kHz across corners. The start-up time of the BGR IP is only 14.7µs in the worst case
The BGR IP operates with 1.4-1.8V AVDD supply and takes in a Reference/PTAT (proportional to absolute temperature) current to bias the internal amplifier.
The current consumption of the module can be reduced to as low as 15µA by adjusting the “Test Mode” bits.
The noise in the generated 550mV reference voltage is less than 400nV at 10kHz across corners. The start-up time of the BGR IP is only 14.7µs in the worst case
查看 High-Performance and Low-Power Bandgap 详细介绍：
- 查看 High-Performance and Low-Power Bandgap 完整数据手册
- 联系 High-Performance and Low-Power Bandgap 供应商
Block Diagram of the High-Performance and Low-Power Bandgap
High-Performance IP
- Low Phase Noise, High-performance Digital LC PLL
- LPDDR5X DDR Memory Controller
- Secure-IC's Securyzr™ High-performance AES-GCM accelerator - optional SCA protection
- Secure-IC's Securyzr™ High-performance AES-XTS accelerator - optional SCA protection
- Modern Audio DSP, designed for battery operated, high-performance, audio and voice applications
- High-performance 32-bit RISC CPU