Original Lossless codec IP core - Full HD 30fps@126MHz (1Sample/clk)
You are here:
Globalfoundries 22nm MIPI D-PHY Rx only V1.2@2.5GHz
Arasan Chip Systems standalone MIPI D-PHY(SM) Recieve (Rx) only for Globalfoundries 22nm FinFET process nodes.
Arasan's standalone D-PHY Rx only for Global Foundry 22nm IP is compliant with standalone MIPI D-PHY(SM) Rx only v1.2 Spec and is developed on its 2nd generation D-PHY silicon-proven IP to reduce risk while the design is optimized to leverage the GF 22nm technology node for the reduction in area and power compared to our previous designs.
Arasan’s MIPI D-PHY(SM) Rx only for GF 22nm is seamlessly integrated with Arasan's own MIPI Camera Serial Interface (CSI) and MIPI Display Serial interface (DSI) as part of its Total MIPI Imaging and Display IP Solution.
Arasan’s standalone MIPI D-PHY(SM) Rx only for GF 22nm supports speeds of up to 2.5 Gbps for SoC designs.
The Arasan’s GF 22nm MIPI D-PHY Analog Transceiver IP Core is fully compliant with the D-PHY v1.2 specification.
It is a universal PHY that can be configured as a transmitter, receiver, or transceiver.
Arasan’s GF 22nm D-PHY consists of an analog front end to generate and receive the electrical level signals, and a digital back end to control the I/O functions.
Arasan’s GF 22nm D-PHY provides a point-to-point connection between 0host and device that complies with a relevant MIPI® standard. A typical configuration consists of a clock lane and 1-4 data lanes. The host is primarily the source of data, and the device is usually the sink of data. The D-PHY lanes can be configured for unidirectional or bidirectional lane operation, originating at the host, and terminating at the device. It can be configured to operate as a master or as a slave. The D-PHY link supports a high-speed (HS) mode for fast data traffic and a low-power (LP) mode for control transactions. In HS mode, the low swing differential signal can support data transfers.
Arasan’s GF 22nm D-PHY Analog Transceiver IP core implements the PPI interface recommended by the MIPI® working groups to easily interface to the required protocols.
Arasan's standalone D-PHY Rx only for Global Foundry 22nm IP is compliant with standalone MIPI D-PHY(SM) Rx only v1.2 Spec and is developed on its 2nd generation D-PHY silicon-proven IP to reduce risk while the design is optimized to leverage the GF 22nm technology node for the reduction in area and power compared to our previous designs.
Arasan’s MIPI D-PHY(SM) Rx only for GF 22nm is seamlessly integrated with Arasan's own MIPI Camera Serial Interface (CSI) and MIPI Display Serial interface (DSI) as part of its Total MIPI Imaging and Display IP Solution.
Arasan’s standalone MIPI D-PHY(SM) Rx only for GF 22nm supports speeds of up to 2.5 Gbps for SoC designs.
The Arasan’s GF 22nm MIPI D-PHY Analog Transceiver IP Core is fully compliant with the D-PHY v1.2 specification.
It is a universal PHY that can be configured as a transmitter, receiver, or transceiver.
Arasan’s GF 22nm D-PHY consists of an analog front end to generate and receive the electrical level signals, and a digital back end to control the I/O functions.
Arasan’s GF 22nm D-PHY provides a point-to-point connection between 0host and device that complies with a relevant MIPI® standard. A typical configuration consists of a clock lane and 1-4 data lanes. The host is primarily the source of data, and the device is usually the sink of data. The D-PHY lanes can be configured for unidirectional or bidirectional lane operation, originating at the host, and terminating at the device. It can be configured to operate as a master or as a slave. The D-PHY link supports a high-speed (HS) mode for fast data traffic and a low-power (LP) mode for control transactions. In HS mode, the low swing differential signal can support data transfers.
Arasan’s GF 22nm D-PHY Analog Transceiver IP core implements the PPI interface recommended by the MIPI® working groups to easily interface to the required protocols.
查看 Globalfoundries 22nm MIPI D-PHY Rx only V1.2@2.5GHz 详细介绍：
- 查看 Globalfoundries 22nm MIPI D-PHY Rx only V1.2@2.5GHz 完整数据手册
- 联系 Globalfoundries 22nm MIPI D-PHY Rx only V1.2@2.5GHz 供应商
mipi dsi IP
- MIPI CSI DSI C-PHY IP for TSMC (5nm, 6/7nm, 12/16nm, 22nm, 28nm, 40nm)
- MIPI DSI Receiver Controller v1.3
- MIPI DSI Transmit Controller v1.3
- MIPI D-PHY / C-PHY Combo IP for TSMC (5nm, 6/7nm, 12/16nm, 22nm, 28nm, 40nm)
- MIPI D-PHY Universal IP in TSMC 22ULP
- MIPI C-PHY/D-PHY Combo TX+ IP 4.5Gsps/4.5Gbps in TSMC N5