You are here:
GF L65LPE 65nm DDR DLL - 104MHz-520MHz
The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock cycle. It uses a phase-locked analog delay line which rejects temperature and supply voltage variations, and has high supply noise rejection for very low jitter operation.
TCI can configure this block to have almost any number of slaves (which delay the arbitrary signals) with a single master section (which establishes the time base) to minimize area and power. The slave delays can be independently set to precise values or dynamically adjusted after determining the boundaries of a data eye. The DDR DLL has excellent linearity and very high resolution.
TCI can also configure this block to output multi-phase clocks directly from the reference clock.
TCI can configure this block to have almost any number of slaves (which delay the arbitrary signals) with a single master section (which establishes the time base) to minimize area and power. The slave delays can be independently set to precise values or dynamically adjusted after determining the boundaries of a data eye. The DDR DLL has excellent linearity and very high resolution.
TCI can also configure this block to output multi-phase clocks directly from the reference clock.
查看 GF L65LPE 65nm DDR DLL - 104MHz-520MHz 详细介绍：
- 查看 GF L65LPE 65nm DDR DLL - 104MHz-520MHz 完整数据手册
- 联系 GF L65LPE 65nm DDR DLL - 104MHz-520MHz 供应商