Frequency detector in 28nm
Basic principal of operation is frequency to voltage converter and converted analog output voltage is dependent on the process corner of the poly resistance and mom capacitor. IP can self-calibrate when predefined input frequency is applied at the calibration input. When a predefined calibration input is applied at the FCAL input pin and CAL=1, IP enters into self-calibration mode to trim the internal RINT, CREF and resulting calibration codes are provided to be stored in static memory of e-fuse. Post calibration it produces the output voltage and digitally converted 4b output to indicate the output frequency of the applied input which is proportional to the applied input frequency. IP includes complete reference generation, trimming circuits, digitizer and calibration engine. During normal operation mode when CAL=0, to trim the internal RC, Digital data DTRIM has to be applied from stored memory during calibration phase.
查看 Frequency detector in 28nm 详细介绍:
- 查看 Frequency detector in 28nm 完整数据手册
- 联系 Frequency detector in 28nm 供应商
Frequency detection IP
- Dual WideBand Frequency Synthesizer with Integrated VCO and Loop Filter
- Securyzr™ Intrusion Detection System (IDS)
- Secure-IC's Securyzr™ Digital Sensor: Universal and Digital Fault Injection Attack Detector can be used across all processes
- Universal Asynchronous Receiver / Transmitter
- Configurable UART with FIFO
- PCI-ISA Bridge