You are here:
- Silicon IP Catalog >
- Processor Solutions >
- Microcontroller >
- 8-Bit Microcontroller >
- 6811 / 68HC11 Microcontroller
8-bit Microcontrollers Family
The D68HC11E is synthesisable SOFT Microcontroller IP Core, fully compatible with the Motorola 68HC11E industry standard. It can be used as a direct replacement for:
* 68HC11E Microcontrollers
and older 68HC11E versions:
* 68HC11A and
* 68HC11D
In the standard configuration, the core has integrated, on-chip, major peripheral functions. An asynchronous serial communications interface (SCI) and separate synchronous serial peripheral interface (SPI), are included. The main 16-bit, free-running timer system, contains input capture and output-compare lines and a real-time interrupt function. An 8-bit pulse accumulator subsystem, can count external events or measure external periods. Self-monitoring, on-chip circuitry, is included, to protect the D68HC11E, against system errors. The Computer Operating Properly (COP) watchdog system, protects against software failures. An illegal opcode detection circuit, provides a non-maskable interrupt, if illegal opcode is detected. Two software-controlled power-saving modes, WAIT and STOP, are available to conserve additional power. These modes make the D68HC11E IP Core especially attractive, for automotive and battery-driven applications.
The D68HC11E Microcontroller Core can be equipped with the ADC Cotroller, allowing use of external ADC Controller, with standard ADC software. The ADC Controller, makes external ADC's visible as internal ADC's in original 68HC11E Microcontrollers.
The D68HC11 has a built-in real time hardware on chip debugger - DoCD , allowing easy software debugging and validation. The D68HC11E is fully customizable - it is delivered in the exact configuration, to meet users requirements. There is no need to pay extra, for not used features and wasted silicon. It includes fully automated testbench with complete set of tests allowing easy package validation, at each stage of SoC design flow.
Each of the DCD's D68HC11E Core, has built in support for DCD Hardware Debug System, called DoCD . It is a real-time hardware debugger which provides debugging capability of a whole System on Chip (SoC).
Unlike other on-chip debuggers, the DoCD provides a non-intrusive debugging of running application. It can halt, run, step into or skip an instruction, read/write any contents of microcontroller, including all registers, SFRs, including user defined peripherals, data and program memories.
* 68HC11E Microcontrollers
and older 68HC11E versions:
* 68HC11A and
* 68HC11D
In the standard configuration, the core has integrated, on-chip, major peripheral functions. An asynchronous serial communications interface (SCI) and separate synchronous serial peripheral interface (SPI), are included. The main 16-bit, free-running timer system, contains input capture and output-compare lines and a real-time interrupt function. An 8-bit pulse accumulator subsystem, can count external events or measure external periods. Self-monitoring, on-chip circuitry, is included, to protect the D68HC11E, against system errors. The Computer Operating Properly (COP) watchdog system, protects against software failures. An illegal opcode detection circuit, provides a non-maskable interrupt, if illegal opcode is detected. Two software-controlled power-saving modes, WAIT and STOP, are available to conserve additional power. These modes make the D68HC11E IP Core especially attractive, for automotive and battery-driven applications.
The D68HC11E Microcontroller Core can be equipped with the ADC Cotroller, allowing use of external ADC Controller, with standard ADC software. The ADC Controller, makes external ADC's visible as internal ADC's in original 68HC11E Microcontrollers.
The D68HC11 has a built-in real time hardware on chip debugger - DoCD , allowing easy software debugging and validation. The D68HC11E is fully customizable - it is delivered in the exact configuration, to meet users requirements. There is no need to pay extra, for not used features and wasted silicon. It includes fully automated testbench with complete set of tests allowing easy package validation, at each stage of SoC design flow.
Each of the DCD's D68HC11E Core, has built in support for DCD Hardware Debug System, called DoCD . It is a real-time hardware debugger which provides debugging capability of a whole System on Chip (SoC).
Unlike other on-chip debuggers, the DoCD provides a non-intrusive debugging of running application. It can halt, run, step into or skip an instruction, read/write any contents of microcontroller, including all registers, SFRs, including user defined peripherals, data and program memories.
查看 8-bit Microcontrollers Family 详细介绍：
- 查看 8-bit Microcontrollers Family 完整数据手册
- 联系 8-bit Microcontrollers Family 供应商