You are here:
- Silicon IP Catalog >
- Processor Solutions >
- Microcontroller >
- 8-Bit Microcontroller >
- 6811 / 68HC11 Microcontroller
8-bit FAST Microcontroller
The DF6811K is an advanced 8-bit MCU IP Core, with highly sophisticated, on chip peripheral capabilities. DF6811K soft core is binary-compatible with the industry standard Motorola 68HC11K 8-bit microcontroller. It has improved FAST architecture - approximately 4 times faster, compared to original implementation. In the standard configuration, the core has major peripheral functions integrated on chip. The Core can be provided in configurations, that match the following microcontrollers:
* MC68HC11K0
* MC68HC11K1
* MC68HC11K4
* MC68HC711K4
* MC68HC11KS2
* MC68HC711KS2
There are two serial interfaces: an asynchronous serial communications interface (SCI) and a separate synchronous serial peripheral interface (SPI). The main 16-bit, free-running timer system has three input capture lines, five output-compare lines and a real-time interrupt function. An 8-bit pulse accumulator subsystem can count external events, or measure external periods.
Self-monitoring circuitry is included on-chip, to protect against system errors. The Computer Operating Properly (COP) watchdog system, protects against software failures. An illegal opcode detection circuit provides a non-maskable interrupt, if illegal opcode is detected.
Two software-controlled power-saving modes - WAIT and STOP, are available to conserve additional power. These modes make the DF6811K IP Core especially attractive for automotive and battery-driven applications.
The DF6811K Microcontroller Core can be equipped with the ADC Cotroller, allowing use of an external ADC Controller, with standard ADC software. The ADC Controller makes external ADC's visible as internal ADC's in original 68HC11K Microcontrollers. The DF6811K has built-in real time hardware on chip debugger - DoCD , allowing easy software debugging and validation. The DF6811K is fully customizable - it is delivered in the exact configuration to meet users requirements. There is no need to pay extra, for not used features and wasted silicon. It includes fully automated testbench with complete set of tests, allowing easy package validation, at each stage of SoC design flow.
Each of the DCD's DF68XX Core, has built in support for DCD Hardware Debug System, called DoCD . It is a real-time hardware debugger, which provides debugging capability of a whole System on Chip (SoC).
Unlike other on-chip debuggers, the DoCD provides a non-intrusive debugging of running application. It can halt, run, step into or skip an instruction, read/write any contents of microcontroller, including all registers, SFRs, including user defined peripherals, data and program memories.
* MC68HC11K0
* MC68HC11K1
* MC68HC11K4
* MC68HC711K4
* MC68HC11KS2
* MC68HC711KS2
There are two serial interfaces: an asynchronous serial communications interface (SCI) and a separate synchronous serial peripheral interface (SPI). The main 16-bit, free-running timer system has three input capture lines, five output-compare lines and a real-time interrupt function. An 8-bit pulse accumulator subsystem can count external events, or measure external periods.
Self-monitoring circuitry is included on-chip, to protect against system errors. The Computer Operating Properly (COP) watchdog system, protects against software failures. An illegal opcode detection circuit provides a non-maskable interrupt, if illegal opcode is detected.
Two software-controlled power-saving modes - WAIT and STOP, are available to conserve additional power. These modes make the DF6811K IP Core especially attractive for automotive and battery-driven applications.
The DF6811K Microcontroller Core can be equipped with the ADC Cotroller, allowing use of an external ADC Controller, with standard ADC software. The ADC Controller makes external ADC's visible as internal ADC's in original 68HC11K Microcontrollers. The DF6811K has built-in real time hardware on chip debugger - DoCD , allowing easy software debugging and validation. The DF6811K is fully customizable - it is delivered in the exact configuration to meet users requirements. There is no need to pay extra, for not used features and wasted silicon. It includes fully automated testbench with complete set of tests, allowing easy package validation, at each stage of SoC design flow.
Each of the DCD's DF68XX Core, has built in support for DCD Hardware Debug System, called DoCD . It is a real-time hardware debugger, which provides debugging capability of a whole System on Chip (SoC).
Unlike other on-chip debuggers, the DoCD provides a non-intrusive debugging of running application. It can halt, run, step into or skip an instruction, read/write any contents of microcontroller, including all registers, SFRs, including user defined peripherals, data and program memories.
查看 8-bit FAST Microcontroller 详细介绍：
- 查看 8-bit FAST Microcontroller 完整数据手册
- 联系 8-bit FAST Microcontroller 供应商