RISC-V processor with vector extension certified for ISO 26262 ASIL D ready
You are here:
16G PHY in TSMC (28nm, 16nm, 12nm)
The multi-lane DesignWare® Multi-Protocol 16G PHY IP is part of Synopsys’ high-performance multi-rate transceiver portfolio, meeting the growing needs for high bandwidth and low latency in enterprise applications. Using leading-edge design, analysis, simulation, and measurement techniques, the multi-protocol 16G PHY delivers exceptional signal integrity and jitter performance that exceeds the standards’ electrical specifications. The PHY is small in area and provides a low active and standby power solution that supports multiple electrical standards including PCI Express, SATA, Ethernet, OBSI/CPRI, JESD204, Serial Rapid I/O and other industry-standard interconnect protocols. The DesignWare Multi-Protocol 16G PHY IP is optimized to meet the needs of applications with high-speed port side, chip-to-chip, and backplane interfaces.
The configurable transmitter and receiver equalizers enable customers to control and optimize signal integrity and at-speed performance. Continuous Calibration and Adaptation (CCA) provides a robust performance across voltage and temperature variations during normal mode of operation. The PHY supports low standby power with advanced L1 substates and low active power with I/O supply under drive, decision feedback equalization (DFE) bypass and V-Boost off. The embedded bit error rate (BER) tester and internal eye monitor provide on-chip testability and visibility into channel performance. The PHY integrates seamlessly with the DesignWare Physical Sublayers and digital controllers/media access controllers (MACs) to reduce design time and to help designers achieve first-pass silicon success. These features reduce both product development cycles and accelerate time-to-market.
The configurable transmitter and receiver equalizers enable customers to control and optimize signal integrity and at-speed performance. Continuous Calibration and Adaptation (CCA) provides a robust performance across voltage and temperature variations during normal mode of operation. The PHY supports low standby power with advanced L1 substates and low active power with I/O supply under drive, decision feedback equalization (DFE) bypass and V-Boost off. The embedded bit error rate (BER) tester and internal eye monitor provide on-chip testability and visibility into channel performance. The PHY integrates seamlessly with the DesignWare Physical Sublayers and digital controllers/media access controllers (MACs) to reduce design time and to help designers achieve first-pass silicon success. These features reduce both product development cycles and accelerate time-to-market.
查看 16G PHY in TSMC (28nm, 16nm, 12nm) 详细介绍：
- 查看 16G PHY in TSMC (28nm, 16nm, 12nm) 完整数据手册
- 联系 16G PHY in TSMC (28nm, 16nm, 12nm) 供应商
PCI Express PHY IP
- Controller IP for PCIe 2.1 as well as with the PHY Interface for PCI Express (PIPE) specification and the AMBA® AXI™ Protocol Specification
- PHY/PCS Logical Sub-Block IP Core for PCIe supporting PCIe 5.0, 4.0, 3.1 PHY/PMA and compliant to the PIPE 5.2 and 4.4.1 Specifications
- Complete PCIe 4.0 Soft IP supporting endpoint, root port, switch, bridge and advanced features such as SR-IOV, multi-function, data protection (ECC, ECRC), ATS, TPH, AER and more
- PCIe 5.0 Controller
- Configurable PCI Express 1.1 Supporting Root Port, Endpoint, Dual-mode Configurations, with Built-in DMA and Configurable AMBA AXI Interconnect
- Gen5 PCIe Hybrid Controller with SR-IOV and ARI Support