12 Bit 300 MSPS Current Steering D/A Converter

特色

• 12 Bit Resolution
• 300 MSPS Output Update Rate
• Typical SFDR of 65dBc
• INL and DNL < 1 LSB
• Die area of 0.8mm2
• Power Dissipation < 90mW
• 3.3V/1.8V power supplies
• Scalable for lower resolution

优势

• The dynamic performance can be maintained for frequencies close to the DAC Nyquist frequency. This is true for output frequencies up to 100MHz.
• The area of the DAC is 0.8mm2
• Developed on standard 0.18�m logic process, the DAC is ideal for integration with a DSP engine. The DAC can be ported to any similar process.
• Lower power consumption can be achieved by increasing the external resistor size.
• The output voltage range can be set by selecting suitable load resistor or external bias resistor values. A differential output voltage swing of up to 2V peak to peak is possible.
• The resolution of the DAC can be scaled to 8 or 10 bits.

可交付内容

• The S3DA300M12BC18 is available from S3 under license agreement and supported with the following deliverables:
• Datasheet
• Characterization Report
• Flat Netlist (cdl)
• Layout View (gds2)
• Abstract View (lef)
• Timing View (tlf)
• Behavioral Model (VHDL/Verilog)
• Silicon Samples
• DemonstrationEvaluation Board
• Integration Support
• For more detailed information regarding the S3DA300M12BC18 D/A converter please refer to the full datasheet which is available upon request. The S3DA300M12BC18 can be delivered as a single IP component for customer integration or S3 engineers can integrate it as part of a SoC engagement.

• 查看 12 Bit 300 MSPS Current Steering D/A Converter 完整数据手册
• 联系 12 Bit 300 MSPS Current Steering D/A Converter 供应商