You are here:
1.18 V/ 1.02...5.1 uA Reference current and voltage source
Reference current and voltage source is used to supply any analog blocks. It is based on the reference voltage source forming temperature compensation voltage and two voltage-to-current converters. The first converter uses an external resistor and output current is characterized by
weak dependence on temperature. The second converter uses an internal resistor and output current is characterized by temperature and process parameters which are matched to the internal resistor. The battery low power indicator consists of a comparator which is based on two-stage operational amplifiers.
The block is fabricated on iHP SiGe BiCMOS 0.25 um (SGB25V) technology.
weak dependence on temperature. The second converter uses an internal resistor and output current is characterized by temperature and process parameters which are matched to the internal resistor. The battery low power indicator consists of a comparator which is based on two-stage operational amplifiers.
The block is fabricated on iHP SiGe BiCMOS 0.25 um (SGB25V) technology.
特色
- iHP SGB25V
- Output current termocompensation in wide temperature range
- Built-in battery low power indicator
- Low power consumption in power-saving mode (optional)
- Small area
- Supported foundries: TSMC, UMC, Global Foundries, SMIC, iHP, AMS, Vanguard, SilTerra
可交付内容
- Schematic or NetList
- Abstract model (.lef and .lib files)
- Layout view (optional)
- Behavioral model (Verilog)
- Extracted view (optional)
- GDSII
- DRC, LVS, antenna report
- Test bench with saved configurations (optional)
- Documentation
应用
- Supply voltage stabilization systems
- Comparison and detection systems
- System-on-chip for different purposes
查看 1.18 V/ 1.02...5.1 uA Reference current and voltage source 详细介绍:
- 查看 1.18 V/ 1.02...5.1 uA Reference current and voltage source 完整数据手册
- 联系 1.18 V/ 1.02...5.1 uA Reference current and voltage source 供应商