MIPI D-PHY Rx-Only 2 Lanes in TSMC (40nm, 28nm, 22nm, 16nm, 12nm, N7, N6)
You are here:
0.4V/250nA Bandgap voltage and current sources
055GF_BVR_01 the bandgap voltage reference generates temperature-compensated voltage due to mutual compensation of temperature dependence of bipolar diodes and resistors. It is a simple to configure and operate block, combining good parameters accuracy, small area and low current consumption. The block consists of bandgap, buffer and current sources. The bandgap produces on pin OUT voltage level around 0.4 V, which adjusted by a trimming codes. The buffer repeats the value of the reference voltage. Signals, EN_VBGBUF and EN_TESTMODE, control the buffer. Each current source delivers a current of 250 nA.
The block is designed on Global Foundries CMOS 55 nm technology.
The block is designed on Global Foundries CMOS 55 nm technology.
查看 0.4V/250nA Bandgap voltage and current sources 详细介绍：
- 查看 0.4V/250nA Bandgap voltage and current sources 完整数据手册
- 联系 0.4V/250nA Bandgap voltage and current sources 供应商
Bandgap IP
- Analog Front End: 2x 12-bit 4 GSPS IQ ADCs, 2x 12-bit 8GSPS IQ DACs, bandgap, temp sensor, PLL, 4 x LDO
- Low-Power Combo Bandgap Voltage and Current References (1.21V/600nA) - GlobalFoundries 0.13um BCD
- Bandgap Voltage Reference (0.6V and 0.8V References)
- Bandgap
- Integrated Bandgap - TSMC 7FF
- Bandgap - TSMC CLN3A